Fix Windows Registry Errors    |    Fix Error Code 0x0000008E    |    STOP 0x0000008E


STOP 0x0000008E : KERNEL_MODE_EXCEPTION_NOT_HANDLED

STOP Errors are usually the result of a hardware malfunction or device driver issue. It is also possible to receive a Blue Screen Error due to bad system memory, malfunctioning power supply, components overheating, or hardware overclocked beyond its specification. In older versions of the Windows OS you may also receive Blue Screen Errors due to incompatible DLL files.

Since the only option when receiving a Blue Screen Error is to reboot, any unsaved data is lost. With that in mind, it is very important to eliminate these errors to protect your data.

Basic Troubleshooting

Troubleshooting STOP Errors can be a difficult and time consuming process. Try these basic steps to fix your own Blue Scree Error. We hope it will help you avoid an expensive service call and provide a rewarding experience of solving the problem on your own.

Advanced Troubleshooting

The following details are for advanced users. These are provided for your convenience and may help those with advanced knowledge discover the root cause of their STOP Error.


Stop 0x8E: KERNEL_MODE_EXCEPTION_NOT_HANDLED

The KERNEL_MODE_EXCEPTION_NOT_HANDLED stop error code has a value of 0x0000008E. This stop error code indicates that a kernel-mode application generated an exception that the error handler did not catch.

Parameters

The following parameters appear on the blue screen.

ParameterDescription
1The exception code that was not handled
2The address where the exception occurred
3The trap frame
4Reserved

Cause

The KERNEL_MODE_EXCEPTION_NOT_HANDLED stop error code is a very common stop error code. To interpret it, you must identify which exception was generated.

Common exception codes include the following:

  • 0x80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.
  • 0x80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERT was encountered when no kernel debugger was attached to the system.
  • 0xC0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation occurred.

For a complete list of exception codes, see the Ntstatus.h file that is located in the inc directory of the Microsoft Windows Driver Kit (WDK).

Resolving the Problem

If you are not equipped to debug this problem, you should use some basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the stop error code message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video adapters.
  • Check with your hardware vendor for any BIOS updates.
  • Disable BIOS memory options such as caching or shadowing.

If you plan to debug this problem, you might find it difficult to obtain a stack trace. Parameter 2 (the exception address) should identify the driver or function that caused this problem.

If exception code 0x80000003 occurs, a hard-coded breakpoint or assertion was hit, but the computer was started with the /NODEBUG switch. This problem should rarely occur. If it occurs repeatedly, make sure that a kernel debugger is connected and that the computer is started with the /DEBUG switch.

If exception code 0x80000002 occurs, the trap frame supplies additional information.

If you do not know the specific cause of the exception, consider the following items:

  • Hardware incompatibility. Make sure that any new hardware installed is listed in the Microsoft Windows Marketplace Tested Products List.
  • Faulty device driver or system service. A faulty device driver or system service might be responsible for this error. Hardware issues, such as BIOS incompatibilities, memory conflicts, and IRQ conflicts can also generate this error.

If the stop error code message lists a driver by name , disable or remove that driver. Also, disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence and the system partition is formatted with NTFS file system, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you have to start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error might be a third-party remote control program. If such software is installed, you can remove the service by starting the system by using the Recovery Console and then deleting the offending system service file.

Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing stop error code 0x1E. You can disable memory caching of the BIOS to try to resolve the error. You should also run hardware diagnostics, especially the memory scanner, that the system manufacturer supplies. For more information about these procedures, see the owner's manual for your computer.

The error that generates this message can occur after the first restart during Windows Setup, or after Setup is finished. A possible cause of the error is lack of disk space for installation and system BIOS incompatibilities. For problems during Windows installation that are associated with lack of disk space, reduce the number of files on the target hard disk drive. Check for and delete any temporary files that you do not have to have, Internet cache files, application backup files, and .chk files that contain saved file fragments from disk scans. You can also use another hard disk drive with more free space for the installation.

You can resolve BIOS problems by upgrading the system BIOS version.

Helpful Tools

The following products are free to try. We have found them to be of the highest quality and value. They have been extremely useful in our own pc troubleshooting and maintainance and we highly recommend trying them out for yourself.


Anti-Malware Pro

With a lightning fast free scan and the largest authentic spyware detection database we have seen, Anti-Malware Pro finds and removes threats to your PC stability and security. Download Anti-Malware Pro


DriverFinder

DriverFinder will scan your system for driver and software updates. Its easy to use interface makes keeping your drivers updated quick and simple. They will even send you an email notification when new driver updates are available for your system! It doesn't get any more convenient than this. Download DriverFinder





Browse STOP Error Codes:





Is a STOP error code missing?

Help us to make errorDecoder.com the best resource we possibly can by submitting you very own STOP error code details. If you have detailed information on any STOP error code please let us know by visiting the following link.

Submit Error Details Form

Fix Error Code 0x0000008E    |    Fix Windows Registry Errors    |    KERNEL_MODE_EXCEPTION_NOT_HANDLED