SCSI_VERIFIER_DETECTED_VIOLATION    |    Repair Windows Error 0x000000F1    |    STOP 0x000000F1


STOP 0x000000F1 : SCSI_VERIFIER_DETECTED_VIOLATION

STOP Errors are usually the result of a hardware malfunction or device driver issue. It is also possible to receive a Blue Screen Error due to bad system memory, malfunctioning power supply, components overheating, or hardware overclocked beyond its specification. In older versions of the Windows OS you may also receive Blue Screen Errors due to incompatible DLL files.

Since the only option when receiving a Blue Screen Error is to reboot, any unsaved data is lost. With that in mind, it is very important to eliminate these errors to protect your data.

Basic Troubleshooting

Troubleshooting STOP Errors can be a difficult and time consuming process. Try these basic steps to fix your own Blue Scree Error. We hope it will help you avoid an expensive service call and provide a rewarding experience of solving the problem on your own.

Advanced Troubleshooting

The following details are for advanced users. These are provided for your convenience and may help those with advanced knowledge discover the root cause of their STOP Error.


Stop 0xF1: SCSI_VERIFIER_DETECTED_VIOLATION

The SCSI_VERIFIER_DETECTED_VIOLATION stop error code has a value of 0x000000F1. This is the stop error code code for all Driver Verifier SCSI Verification violations.

Parameters

The four stop error code parameters are displayed on the blue screen. Parameter 1 identifies the type of violation.

Parameter 1Parameter 2Parameter 3Parameter 4Cause of Error
0x1000First argument passedSecond argument passedReservedThe miniport driver passed bad arguments to ScsiPortInitialize.
0x1001Delay, in microsecondsReservedReservedThe miniport driver called ScsiPortStallExecution and specified a delay greater than 0.1 second, stalling the processor too long.
0x1002Address of routine that took too longAddress of miniport's HW_DEVICE_EXTENSIONDuration of the routine, in microsecondsA miniport routine called by the port driver took longer than 0.5 second to execute.

(0.5 seconds is the limit for most routines. However, the HwInitialize routine is allowed 5 seconds, and the FindAdapter routine is exempt.)

0x1003Address of miniport's HW_DEVICE_EXTENSION Address of the SRBReservedThe miniport driver completed a request more than once.
0x1004Address of the SRBAddress of miniport's HW_DEVICE_EXTENSIONReservedThe miniport driver completed a request with an invalid SRB status.
0x1005Address of miniport's HW_DEVICE_EXTENSIONAddress of LOGICAL_UNIT_EXTENSIONReservedThe miniport driver called ScsiPortNotification to ask for NextLuRequest, but an untagged request is still active.
0x1006Address of miniport's HW_DEVICE_EXTENSIONInvalid virtual addressReservedThe miniport driver passed an invalid virtual address to ScsiPortGetPhysicalAddress.

(This usually means the address supplied doesn't map to the common buffer area.)

0x1007Address of ADAPTER_EXTENSIONAddress of miniport's HW_DEVICE_EXTENSIONReservedThe reset hold period for the bus ended, but the miniport driver still has outstanding requests.

Cause

See the description of each code in the Parameters section for an explanation of the cause.

Resolving the Problem

This stop error code can only occur when Driver Verifier has been instructed to monitor one or more drivers. If you did not intend to use Driver Verifier, you should deactivate it. You might consider removing the driver which caused this problem as well.

If you are the driver writer, use the information obtained through this stop error code to fix the bugs in your code.

The Driver Verifier SCSI Verification option is only available in Windows XP and later. For full details, see Driver Verifier.

Helpful Tools

The following products are free to try. We have found them to be of the highest quality and value. They have been extremely useful in our own pc troubleshooting and maintainance and we highly recommend trying them out for yourself.


Anti-Malware Pro

With a lightning fast free scan and the largest authentic spyware detection database we have seen, Anti-Malware Pro finds and removes threats to your PC stability and security. Download Anti-Malware Pro


DriverFinder

DriverFinder will scan your system for driver and software updates. Its easy to use interface makes keeping your drivers updated quick and simple. They will even send you an email notification when new driver updates are available for your system! It doesn't get any more convenient than this. Download DriverFinder





Browse STOP Error Codes:





Is a STOP error code missing?

Help us to make errorDecoder.com the best resource we possibly can by submitting you very own STOP error code details. If you have detailed information on any STOP error code please let us know by visiting the following link.

Submit Error Details Form

Fix Windows Registry Errors    |    Repair Windows Error 0x000000F1    |    STOP 0x000000F1